top of page
BARON CAMERA VAN PACK GUIDE
Back of Van
Large cases tend to be loaded first down the isle. Once there is just enough room for the carts, the carts are loaded and then small cases are put on carts.
Light switches are inside top right. If the red LED is on, then you can switch to continuous power. If the red LED is off, then the power is from the door switch and will timeout.
Light switches are inside top right. If the red LED is on, then you can switch to continuous power. If the red LED is off, then the power is from the door switch and will timeout.
Side Door
Frames are all loaded behind the bulk head. Please put more delicate nets and gel frames between solids to protect them. All frames of a certain size should be together.
Take care not to put gear in the step area as it will interfere with the door closing.
Take care not to put gear in the step area as it will interfere with the door closing.
Under the c-stand shelf are things like: Quackers, Sash, menace arm, black wrap, furniture clamps.
Cab
The power between the seats can be turned on with the button on the control panel. The center switch provides continuous power to the back for lighting.
Inverter is rated for 2kw but in practice should be kept to 1kw if van is not running and about 1500w if the van is idling.
Inverter is rated for 2kw but in practice should be kept to 1kw if van is not running and about 1500w if the van is idling.
This occasionally changes based on the project, but this is the standard configuration.
bottom of page